ZS1063829 Replacement Screw Air Compressor Oil Separator

0 sold

When the compressed air enters the oil-water separator, the flow direction and speed change sharply, and then rely on inertia to separate the oil droplets and water droplets with a density greater than that of the compressed air. The common ones are the impact oil-water separator and the annular rotary oil-water separator. After the compressed air enters the housing of the oil-water separator from the inlet, the airflow is first blocked by the baffle and folds back downwards, and then rises upwards to produce a circular rotation. In this way, water droplets and oil droplets are separated from the air under the action of centrifugal force and inertial force and settled on the bottom of the shell.

Product Introduction

1. Regularly clean the filter, open the release valve at the bottom of the separator, and remove the sediment and impurities deposited in the lower part

2. Clean the internal separation components of the separator in time, and do not use cleaning agents to clean the inner wall and components of the separator

3. In the event of a failure, the cause should be found out and the failed coalescing element should be replaced in time